Fit for Purpose | Hydro Wellness

In recovery and wellness facilities, small pools such as spas, plunge pools and hydrotherapy baths are the heart of the experience. These intimate bodies of water are designed for healing and relaxation, yet they also carry the same demanding water quality requirements as other publicly used bodies of water in the aquatic industry.

Keeping these environments safe, compliant and consistently inviting requires more than daily testing; it takes the right planning, technology and expertise.

That’s exactly why Brauer Swim developed the Hydro Wellness Collection — to help operators meet and exceed compliance standards through tailored systems that are truly Fit for Purpose.

The Challenge: Small Water Volume, High Bather Load

A typical recovery spa or plunge pool might hold only a few thousand litres of water but can serve dozens of clients each day. This means the bather load per litre is far higher than in a standard swimming pool and is therefore more difficult to get the treatment right.

Every bather introduces body oils, perspiration, cosmetics and microorganisms that impact water balance. With limited water volume, even small changes can cause big fluctuations in chlorine, pH and clarity — increasing the risk of non-compliance and reduced water comfort.

When compliance fails, so does the customer experience.

Understanding Compliance for Small Pools

State health departments across Australia have clear expectations for small, heated aquatic environments. For Queensland, these may include:

• Testing frequency: Daily pre-opening testing plus additional testing throughout the day.
• Chemical balance: Maintaining correct levels of Free Chlorine, Total Chlorine, Combined Chlorine, pH, Alkalinity, Hardness, Cyanuric Acid, Total Dissolved Solids (TDS) and Phosphate.
• Microbiological testing: Routine monthly laboratory analysis for pathogens such as coli and Pseudomonas aeruginosa.
• Equipment performance: Meeting compliant circulation, turnover, filtration and disinfection rates.
• Maximum temperature level: The water temperature should not exceed 40 °C.

These standards ensure that every user enjoys clean, clear and safe water — but achieving this consistently requires intelligent, integrated technology.

Check your state’s health department guidelines at https://healthyswim.com.au/pool-operators-legislation/

Technology That Makes Compliance Easier

Brauer Swim’s Hydro Wellness Collection was created with the industry, for the industry to address the unique compliance challenges faced by recovery centres.

B-Protected – Onsite Inline Chlorine Generation – Reliable Disinfection

Our proprietary Onsite Inline Mineral Chlorine Generators have become the industry standard for maintaining primary sanitisation levels, ensuring regulatory compliance, health and total peace of mind.

Utilising Brauer Swim’s Proprietary Inductor Technology, the B-Protected inline generators represent a significant upgrade from granular or liquid chlorine dosing systems, offering superior safety, cost efficiency and operational performance.

As the safest and most cost-effective way to produce chlorine from dissolved minerals and magnesium through electrolysis, they also eliminate the health and safety risks associated with chlorine leaks, spills and off-gassing. Compact and built with durable components, our Australian-made systems offer customisable solutions, all backed by an industry-leading warranty for confidence and reliability.

B-Pure – AOP-UV Disinfection Systems – Crystal Clear Water Quality

Our patented, award-winning AOP-UV Disinfection Systems offer the ultimate solution for enhancing water quality in commercial pools and spas.

Utilising Brauer Swim’s Patented Technology to generate powerful hydroxyl radicals, this Advanced Oxidation Process (AOP) effectively reduces combined chlorine and targets chlorine-resistant viruses, parasites and bacteria — including Cryptosporidium and Giardia.

These systems ensure full compliance with health regulations while significantly reducing chlorine demand and the need for shock dosing. Designed and built in Australia to meet the specific water chemistry challenges of high bather load pools and spas, they deliver guaranteed results, improving both safety and water quality.

The B-Pure AOP-UV systems not only enhance bather comfort but also elevate the experience for staff, visitors and members alike.

B-Smart – Water Chemistry Control – Automated Control Made Simple

Our Commercial Chemistry Controllers integrate cutting-edge technology with precision monitoring to maintain optimal water quality in commercial pools and spas.

Equipped with highly accurate sensors, these controllers continuously measure key water parameters, ensuring compliance with health department regulations while minimising chemical usage and energy consumption.

The B-Smart controllers automatically control dosing equipment, maintaining chlorine, pH and ORP levels, simplifying water management and ensuring consistently clean, safe water for pool and spa operators.

With customisable programming options and remote monitoring with alerts available, these controllers offer an efficient and reliable solution for wellness centres focused on maintaining the highest standards of water quality.

Planning & Project Management: Fit for Purpose from the Start

Beyond equipment compliance depends on good planning and system design.
Brauer Swim’s project management and technical support services ensure every spa, plunge pool or hydrotherapy facility is designed for optimal performance.

Our team works with builders, architects and operators to deliver:

• Equipment specification for proper sizing to volume and load
• Correct flow and turnover rates for small pools
• Efficient plumbing, dosing and plant room layout
• Full commissioning, training and after-care support

This whole-of-system approach means your water treatment system isn’t just compliant — it’s reliable, easy to operate and tailored to your facility’s real-world use.

Why It Matters: Safety, Satisfaction & Retention

Clients may not see the technology beneath the surface but they feel it.
Water that looks clean, feels soft and smells fresh builds trust and repeat business.
With Brauer Swim’s Hydro Wellness Collection, operators can confidently deliver premium water quality that supports health outcomes while maintaining compliance with every department guideline.

Because when it comes to recovery and wellness, small pools must meet big standards — and Brauer Swim makes that possible.

Hydro Wellness | Fit for Purpose

Created with the industry, for the industry — the Brauer Swim Hydro Wellness Collection helps recovery and wellness centres meet and exceed compliance ensuring every spa, plunge pool and hydrotherapy space delivers safe, revitalising water every day. Explore more on the Hydro-Wellness Collection here.